Posted on | February 6, 2011 | No Comments
Secret Revealed: What looks better and protects your siding is too much?
As promised in our last exciting episode on how to extend the eaves, here is another way of building a broader surveillance that can add to the rustic look and feel of your home a new log-sided and protect Your coating too.
This procedure, like the one I’ll discuss in the next newsletter, calls for the removal of two to three feet of roofing and cladding around the perimeter of the roof to expose the bottom of the beams. As before, we have a good time jobs. Also, be aware that when you re-roof exposed areas, the new coating material will probably not match the rest of the roof – which is probably affected to some extent. This could be a good time to spring a new roof as you think. Hey! Can I make a suggestion: you should not pay for it.
Now since this is considered structural renovation project, a trip to your local building department might be in order. And do not forget to take your checkbook.
When the lower end of the roof frame is exposed, “Sistering” in the extensions of the beam along the side of the beam current is very simple. The spliced joint of each extension must be at least 30 inches long and nailed securely to each side of the joint. These added spokes are allowed to extend from building and support up to six feet overhead on each side of the home.
For the eardrum, flat on the X 4s 2 in notches cut in the last two beams. As extensions of football in the third beam. Nail the three points. You can leave these extensions that protrude out of the building two feet to reflect the expected rush. They should be more than two meters deep at all angles of the roof. If the overhang is designed gear eighteen inches or less, the area of these supports can be three feet. A carpenter real (I’m not here to slander) leaves a bit extensions “of the length of the beam so that they can be cut to a line of fire.
After struggling with the last two paragraphs I think I would do the job of trying to explain it. But if you follow me on this point, the next thing to do is to link the extension with X 2 4 2 X 6s on both sides and the gable of the house, replace the cover on exposed areas and install solar panels on the sides and end barge on the pinion seal. Now you are ready for the roofer. You really need to check that the book now!